Orlen Oil / Sənaye (en)

Quality class: Quality class according to ISO 11158 – HM
Viscosity grad: ISO VG: 32

 

General features

Hydrol® Premium L-HM hydraulic oils are manufactured basing on refined mineral oils and zinc free set of enriching additives.

Features:

High level operating properties:
– high thermal and hydrolytic stability,
– high resistance to oxidation,
– high ability to transfer loads (FZG test, breaking load >12) and very good antiwear properties,
– very good ability to be filtered,
– very good resistance to foaming,
– compatibility with sealants.
Hydrol® Premium L-HM can be mixed with other zinc free hydraulic mineral oils.

Application

High durability of Hydrol® Premium L-HM enables their application in highly loaded systems of power transmission as well as hydraulic drive and control operating in extremely high pressures and temperatures. New, unique formula used in the manufacturing process guarantees their extended lifetime compared to standard mineral hydraulic oils.

Standards, approvals, specifications

Eaton (Vickers) M-2950-S
Eaton (Vickers) I-286-S
Eaton (Vickers) – Brochure 03-401-2010 – 35VQ25A
Parker Denison HF-0, HF-1, HF-2
Bosch Rexroth RE 90220-01
MAG/ Cincinnati Machine P-68
DIN 51524 part 2

Physical and chemical properties

Parameters Unit Typical values
Kinematic viscosity at 400C mm2/s 32.4
Viscosity index 102
Flow temperature 0C -28
Ignition temperature 0C 210
Resistance to foaming · susceptibility to foaming: foam volume after 5 min. of blowing with air at 250C, · foam durability: foam volume after 10 min. standing still at 250C standing still at 250C ml 25 0
Corrosiveness to copper 3 h/1200C, corrosion rate reference sample 1 a
Deemulsifying properties – emulsion and water separation time to achieve: – 40 – 43 ml of oil – 37 – 40 ml of water – 0 – 3 ml of emulsion at min. 10
0C 54
Ability to release air at 50°C min. 5
Ability to transfer loads with the FZG, breaking load, minimum 12
ATTENTION: Physicochemical parameters listed in the table are typical values. Real values are stated in quality control certificates attached to each product lot.
  • Date
    May 28, 2017
    Quality class: Quality class according to ISO 11158 – HM Viscosity grad: ISO VG: 32   General features Hydrol® Premium L-HM hydraulic oils are manufactured basing […]
  • Date
    May 28, 2017
    Quality class: Viscosity grad: ISO VG: 68   General features Hydrol® HLP-D cleaning hydraulic oils are manufactured basing on deep refined mineral base oil and a […]
  • Date
    May 28, 2017
    Quality class: Viscosity grad: ISO VG: 46   General features Hydrol® HLP-D cleaning hydraulic oils are manufactured basing on deep refined mineral base oil and a […]
  • Date
    May 28, 2017
    General features GREASEN STP is a calcium grease with the consistency class of 1. Its base is mineral oil with viscosity of 85 mm2/s at 40°C. Soft […]
  • Date
    May 28, 2017
    General features Greasen S-EP 00/000 and Greasen N-EP 00/000 are semi-liquid greases manufactured based on a lithium-calcium soap in NLGI 00/000 consistence class. They consist, inter […]